Digital data communication for measurement and control – High availability automation networks
IEC 62439 is applicable to high-availability automation networks based on the ISO/IEC 8802-3 (IEEE 802.3) (Ethernet) technology.
Number |
Name |
Edition |
Published |
Document |
IEC 62439 |
High availability automation networks |
|||
IEC 62439-1 |
Part 1: General concepts and calculation methods |
1 |
IS 2010 |
|
IEC 62439-2 |
Part 2: Media Redundancy Protocol (MRP) |
2 |
IS 2016 |
|
IEC 62439-3 |
Part 3: Parallel Redundancy Protocol (PRP) and High-availability Seamless Redundancy (HSR) |
3 |
IS 2016 |
|
IEC 62439-4 |
Part 4: Cross-network Redundancy Protocol (CRP) |
2 |
IS 2010 |
|
IEC 62439-6 |
Part 6: Distributed Redundancy Protocol (DRP) |
1 |
IS 2010 |
|
IEC 62439-7 |
Part 7: Ring-based Redundancy Protocol (RRP) |
1 |
IS 2011 |
|
|
IEC 62439-x Ed 2.0: Industrial communication networks - High availability automation networks |
2 |
FDIS |
|
|
|
|
|
|
IEC 62439 |
High availability automation networks It cancels and replaces IEC 62439 published in 2008 and constitutes a technical revision. It includes the following significant technical changes with respect to IEC 62439 (2008): •adding a calculation method for RSTP (rapid spanning tree protocol, IEEE 802.1Q), •adding two new redundancy protocols: HSR (High-availability Seamless Redundancy) and DRP (Distributed Redundancy Protocol), •moving former Clauses 1 to 4 (introduction, definitions, general aspects) and the Annexes (taxonomy, availability calculation) to IEC 62439-1, which serves now as a base for the other documents, •moving Clause 5 (MRP) to IEC 62439-2 with minor editorial changes, •moving Clause 6 (PRP) was to IEC 62439-3 with minor editorial changes, •moving Clause 7 (CRP) was to IEC 62439-4 with minor editorial changes, and •moving Clause 8 (BRP) was to IEC 62439-5 with minor editorial changes, •adding a method to calculate the maximum recovery time of RSTP in a restricted configuration (ring) to IEC 62439-1 as Clause 8, •adding specifications of the HSR (High-availability Seamless Redundancy) protocol, which shares the principles of PRP to IEC 62439-3 as Clause 5, and •introducing the DRP protocol as IEC 62439-6. |
2 |
IS 2010 |
|
|
|
2 |
FDIS |
|
|
|
2 |
CDV |
|
|
IEC 62439:2008(E) is applicable to high-availability automation networks based on the ISO/IEC 8802-3 (Ethernet) technology. It specifies: - a classification scheme for network characteristics (see Annex A); - a methodology for estimating network availability (see Annex B); - a set of communication protocols that realize high availability automation networks via the use of redundancy and that can be used in a variety of applications. |
1 |
IS 2008 |
IEC 62439:2008 |
|
|
1 |
FDIS |
|
|
|
1 |
CDV |
|
|
|
1 |
CD |